PDA Battery Replacement
WARNING: I take no responsibility for anything in this guide. You break it, your problem.
Step Five: Test it!
Before you stick the casing back on, test that the PDA still works. It is probably a good idea to give it a full charge with the case off, to prevent any memory effect. Just don't touch the motherboard!
Step Six: Put the case back on
|
Before you are tempted just to press the back on, make sure that the speaker cable is inside the actual casing. You also need to slide the 3.5mm audio jack back into the shell's hole.
Carefully click the top clips back together.
The do one of the sides, making sure that everything is inside the case.
And finish by clicking the final side together. |
Final Words
Well, hopefully you replaced your battery without accidentally killing your motherboard. One thing I found is that the bent little parts of my case (which I did with the screwdriver) can be pushed back into their gaps effectively enought o prevent any major scratches. I am rather pleased with the final result.
If you have any comments or suggestions on what I have done here, please email me at webmaster.hackavatar@gmail.com